Sliding Doors

Every time we go out our sliding glass door and hear that grinding under the rollers, and have to use excessive force to open it, we say to our selves, "I'm gonna fix that one of these days"! But then we realize, "HOW"? Well, it's really quite simple, but there are a few tricks; so let's get started.

1

Removing the door panel: On a sunny day with mild temperatures, purpose to "fix that sucker", and do it expediently. Sliding glass doors are heavy and awkward, so get some help to remove the panels if you need. Usually, the operable panel of a sliding glass door will come out on the inside of the structure. Sometimes there will be sag in the header above the unit, so it may be necessary to remove the fixed panel from the outside first. Take your small Phillips screw driver and find the roller adjustment holes at the bottom of the door. Insert the tool into the hole and engage the roller screw. Lower the door down as much as possible, by doing forward and back rollers. Now try to lift the door up and swing the bottom into the room to remove the door.

2
Removing the old roller
Removing the old roller

Removing the rollers: Rest your door on it's edge, and locate the roller adjustment hole. JUST ABOVE that hole is another hole. This is the hole that has a frame/roller screw in it. You must completely remove this screw to remove the old roller.( Be careful not to separate the frame from the glass when doing this procedure)Use the large Phillips screw driver to remove this screw. Pry out the old roller. Secure the door.

3
Like for Like
Like for Like

Go shopping: VERY IMPORTANT; TAKE THE OLD ROLLER TO THE HARDWARE STORE. You must get the identical roller. Examine the new roller and match it in every way to the old. Double check by getting a clerk. BUY TWO ROLLERS. Save money by NOT making a return trip.

4
You must thouroughly clean the track
Installing new rollers: Insert the new roller in the frame you disassembled, and screw it back together. Flip the door over and do the other side. Put the door aside and prepare the sliding glass door frame track.

5
You won't believe how much goock is in there!
You won't believe how much goock is in there!

Cleaning the track: Lay paper towels on your carpet to protect it. Vacuum and brush out the track all the way across. Now spray the roller track with the WD-40 and let it soak in. Wear safety glasses and use the tooth picks to gouge out all the dead bugs, leaves, dog hair, alligators, and rhinoceroses out of the track. And stay at it until you can see shiny aluminum at the very bottom of the crevice. Use toilet paper or more paper towels to mop up the sludge.
6

Re-installing the door: Bring over your door and put it back in. First insert it in at the top, and then swing the bottom into place and down onto the track. Use the small Phillips screw driver to adjust the new rollers. Slide the door over to the closed position, but leave a 1/4" gap top to bottom. Adjust the rollers so the gap is parallel to the frame vertically. Congratulations, your door slides very nicely now, and you can say, "I did it myself"! Thanks to Ken Swanson
7
Removing the lock screws
Removing the lock screws

Optional Extraction: Sometimes lodged doors have to be removed from the outside. Even to the point of grinding off the screen guide. To do the panel extraction, remove the top and bottom fixed center screws on the fixed panel.(see picture)Pull the fixed panel out of the side frame, lift the panel up, and swing the bottom out and away, and take out the fixed panel. Now the operable panel will swing outside and be removed.